S-18 Carbon Steel Powder Coating Expanded Metal Mesh For Fence

S-18 Carbon Steel Powder Coating Expanded Metal Mesh For Fence

General Production Information

Production introduction

Expanded metal is one continuous single sheet of mesh produced by cutted and stretched to form a regular pattern(often- diamond-shaped) of metal mesh-like material.

The strands and knuckles are set at a uniform angle to the plane of the sheet. This adds strength and rigidity and distributes the load to the supporting frames.

Because there are no welds or joints it operates as a structural member that distributes loads evenly over a wide area.

The high strength to weight ratio makes it suitable for many industrial and ornamental applications.

Material:

1. Carbon Steel
2. Stainless steel plate
3. Galvanized plate
4. Titanium plate
5. Copper

Surface Treatment:

1. Painting
2. Galvanized
3. Powder Coating

Specification

Applications

Expanded metal is frequently used to make fences, walkways, and grates, as the material is very durable and strong, unlike lighter and less expensive wire mesh. The many small openings in the material allow flow through of air, water, and light, while still providing a mechanical barrier to larger objects. Another advantage to using expanded metal as opposed to plain sheet matel is that the exposed edges of the expanded metal provide more traction, which has led to its use in catwalks or drainage covers.

Large quantities of expanded metal are used by the construction industry as metal lath to support materials such as plaster, stucco, or adobe in walls and other structures.

Expanded metal is also used by artists, expecially sculptors, who use the material to form complex 3-dimensional surfaces and compound cuives which can then be covered with plaster, clay, or other materials.

A similar material made of still sheets of paper or carboard is used as a low-cost cushioning and packaging material.

In contemporary architecure, expanded metal has been used as an exposed facade or screen material which can be formed into simple or complex decorative shapes. Photographic images may be printed on the surface, producing textures or large graphic images, which still allow light to filter through the exterior surface of a building.

Expanded Metal Mesh Accessory

Expanded Metal U-Edging is an expanded metal product accessory. it is a metal U-shaped L-shaped or square pipe strip attached to the edge of an expanded metal product to make the edges more attractive and uniform. It provides a safety barrier at the cut edge of the sheet covering sharp cut edges, it is available in carbon steel,stainless steel, aluminum and galvanized sheet.

1. Attractive
2. Covers rough or jagged edges
3. Durable
4. Easy to install

Our Advantage

1. We have a wide range of products and supply Thai standard American standard South Africa Xinjiapo and other standard products.
2. Customized according to customer's requirement for mesh size, opening size, specification, patterns
3. Adequate inventory, low order quantity
4. Deep processing service